Produced using state of the art Modern extruded EPDM technology, a cost effective installer friendly one piece EPDM water proofing solution with a comprehensive range of accessories.
-
One piece EPDM membrane – The seamless solution
-
Seamless sheets in the following widths: 3.05m, 4.57m and 6.10m wide upto 30.50m long
-
1.05mm, 1.14mm, 1.2mm and 1.52mm thickness
-
Great puncture resistance and is strong enough to walk on.
-
A high quality modern dense extruded EPDM which is not produced using the classic calendaring process
-
Low talc virtually dust free
-
Amazing elongation, which allows for all typical building movement
-
Flexi Proof flat roofing systems one piece membrane is fully recyclable and more energy-efficient to make, so it’s kinder to the planet


-
UV and ozone resistant A crack less rubber unaffected by long term exposure to elements that break down nearly all other flat roofing systems.
-
Low maintenance system
-
CE marked
-
Produced in a ISO 9001 registered facility
-
50 year life expectancy
-
Broof (T4) fire rating
-
Suitable for residential refurbishment and residential new build works
ADHESIVE & SEALANTS

Water Based Deck Adhesive
Water Based Deck Adhesive is a high strength, solvent free adhesive used for bonding EPDM membrane to the timber deck…

Contact Bonding Adhesive
Contact Bonding Adhesive is a high strength solvent adhesive used to adhere the membrane around the perimeter and on upstands…

Spray Contact Adhesive Tank
Spray Contact Adhesive is a spray applied contact adhesive for quick and easy applications to a wide range of roof deck surfaces…

Spray Contact Aerosol
Spray Contact Adhesive is a quick and easy hand spray applied contact adhesive for bonding epdm in smaller areas …

Water Block Mastic
Water Block mastic is designed to be used in conjunction with termination bar installations to provide a compression type seal…

Lap Edge Sealant
Lap Edge Sealant is designed to be used to seal the cut edges of uncured EPDM flashing tapes and the edges of termination bars…

EPDM Primer
EPDM Primer is a fast solution for cleaning and priming EPDM and surfaces prior to the application of pressure Sensitve tapes…

Solvent Membrane Cleaner
Weathered Membrane Cleaner is used to clean both new and in-service EPDM membrane. It helps to loosen and remove dirt and other contaminants from the surface of the membranes…
FLASHING & SEAM TAPES

3″ SEAM TAPE
Seam Tape is a vulcanized rubber pressure sensitive tape designed to provide high-strength, watertight seams for EPDM single ply roofing membranes…

6″ COVER TAPE
Semi-Cured Cover Tape is a semi-cured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape…

9″ & 18″ FLASHING TAPE
Uncured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape. The flashing tape is extremely flexible and can be formed to fit irregular shapes and elevation changes…

PERIMETER FASTENING
FLEXI PROOF perimeter fastening tape is designed to secure EPDM membranes at the transition from the roof deck to the vertical wall and prevent bridging of the membrane.
DRAINS & OUTLETS

INTERNAL DRAIN
The Internal Outlet drain is one of the best ways of connecting to a 68mm/100mm/110mm rainwater pipe (standard domestic UK size)…

HORIZONTAL DRAIN
The main use of the horizontal outlet is to drain water through walls and pitched roofs as well as the potential to be used as a vertical drain in box gutters…

BALCONY OUTLET
The main use of the balcony outlet is to drain water through walls and pitched roofs as well as the potential to be used as a vertical drain in box gutters…

PIPE FLASHING
EPDM pipe seals are made of cured EPDM with a Pressure Sensitive tape applied to the bottom of the pipe flange. It’s ideal for quick and easy flashing of pipes 12mm up to 150mm…
METAL FLASHINGS

WALL FLASHING TRIM
Tough plastisol coated sheet steel preformed preformed in one size designed to terminate the EPDM membrane when the flat roof meets a wall or parapet…

METAL EDGE TRIM
Tough plastisol coated sheet steel preformed in a variety of sizes. For creating a finishing edge. An economical, but high quality finish to the roof perimeter…

TERMINATION BAR
The Termination Bar is an extruded aluminium bar; that’s designed for securing and sealing compression type flashing terminations mainly used for adjoining flat roof connections…
PVC TERMINATIONS

KERB / UPSTAND
This is a one part Pvcu trim featuring a compression seal along the underside to create a water tight connection to the roofing membrane. This trim eliminates the need of creating a timber upstand as a water check at the roof perimeter…

RUN OFF TRIM
This is a two part pvcu trim with a batten back plate and the front plate with compression seal along the top edge designed for creating a gutter drip section , the trim also provides reliable periimeter securement of the roofing membrane..
Got a Question?
If you have a question about one of our products or need any technical advice,
do not hesitate to drop us a message
Find us in Social Media