Ideal for a wide range of flat-roof areas, from flat roof extensions and dormer window flat roofs to porches, garages and garden studios, Flexi-Proof fleece- backed EPDM delivers a really smart finish! Not only does it look good, it is durable in all weather conditions and the high level of flexibility allows for typical building movement.
High specification EPDM membrane
Superior in looks and performance than standard EPDM Membranes, the tough combination of 1.2mm EPDM and a 300 gram geotextile fleece results and in a combined overall thickness of 2.6mm!
Clean and safe
Flexi-Proof fleece-backed EPDM is quick and clean to install vs bitumen based systems, Cold applied, there’s no risk of fire on site. And with a 25-year membrane warranty, you can enjoy peace of mind and a job well done.
Quality means everything
Flexi-Proof fleece-backed EPDM is manufactured in an ISO 9001-registered factory using an environmentally friendly process and modern extrusion technology resulting in a dense and uniform single-ply system.
Fleece backed strength with Turbo seam effiancy
Embedded Fleece Backing Technology (EFT) provides additional strength and protection and factory- applied turbo seam (TS) technology ensures fast and easy installation. Flexi-proof fleece-backed EPDM conforms to all required UK safety standards and is fully recyclable.













WASTE FREE INSTALLATIONS
Generally, fleece-backed EPDM is available in very limited roll sizes. This inevitably results in wasted materials, which reflects on profitability and the final finished cost of the roof. Flexi-Proof fleece backed has addressed these problems and made innovative improvements ,which bring great benefits to the installer and property owner.
- 1.5m wide x 15m long rolls taped on three sides, allowing roll ends to be joined without the use of cover tape.
- 1.5m wide x 60m long rolls cut to length
- 0.75m wide x 60m long rolls cut to length.
All rolls are pre-taped for greater efficiency on site and, importantly, the highest quality jointing during installation. It means work can be completed in a timely manner and, in most cases, with the bare minimum of waste – a job well done and customer satisfaction guaranteed!

ADHESIVE & SEALANTS

Water Based Deck Adhesive
Water Based Deck Adhesive is a high strength, solvent free adhesive used for bonding EPDM membrane to the timber deck…

Contact Bonding Adhesive
Contact Bonding Adhesive is a high strength solvent adhesive used to adhere the membrane around the perimeter and on upstands…

Spray Contact Adhesive Tank
Spray Contact Adhesive is a spray applied contact adhesive for quick and easy applications to a wide range of roof deck surfaces…

Spray Contact Aerosol
Spray Contact Adhesive is a quick and easy hand spray applied contact adhesive for bonding epdm in smaller areas …

Water Block Mastic
Water Block mastic is designed to be used in conjunction with termination bar installations to provide a compression type seal…

Lap Edge Sealant
Lap Edge Sealant is designed to be used to seal the cut edges of uncured EPDM flashing tapes and the edges of termination bars…

EPDM Primer
EPDM Primer is a fast solution for cleaning and priming EPDM and surfaces prior to the application of pressure Sensitve tapes…

Solvent Membrane Cleaner
Weathered Membrane Cleaner is used to clean both new and in-service EPDM membrane. It helps to loosen and remove dirt and other contaminants from the surface of the membranes…
FLASHING & SEAM TAPES

3″ SEAM TAPE
Seam Tape is a vulcanized rubber pressure sensitive tape designed to provide high-strength, watertight seams for EPDM single ply roofing membranes…

6″ COVER TAPE
Semi-Cured Cover Tape is a semi-cured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape…

9″ & 18″ FLASHING TAPE
Uncured EPDM membrane laminated to a vulcanized, high-strength EPDM pressure sensitive tape. The flashing tape is extremely flexible and can be formed to fit irregular shapes and elevation changes…

PERIMETER FASTENING
FLEXI PROOF perimeter fastening tape is designed to secure EPDM membranes at the transition from the roof deck to the vertical wall and prevent bridging of the membrane.
DRAINS & OUTLETS

INTERNAL DRAIN
The Internal Outlet drain is one of the best ways of connecting to a 68mm/100mm/110mm rainwater pipe (standard domestic UK size)…

HORIZONTAL DRAIN
The main use of the horizontal outlet is to drain water through walls and pitched roofs as well as the potential to be used as a vertical drain in box gutters…

BALCONY OUTLET
The main use of the balcony outlet is to drain water through walls and pitched roofs as well as the potential to be used as a vertical drain in box gutters…

PIPE FLASHING
EPDM pipe seals are made of cured EPDM with a Pressure Sensitive tape applied to the bottom of the pipe flange. It’s ideal for quick and easy flashing of pipes 12mm up to 150mm…
METAL FLASHINGS

WALL FLASHING TRIM
Tough plastisol coated sheet steel preformed preformed in one size designed to terminate the EPDM membrane when the flat roof meets a wall or parapet…

METAL EDGE TRIM
Tough plastisol coated sheet steel preformed in a variety of sizes. For creating a finishing edge. An economical, but high quality finish to the roof perimeter…

TERMINATION BAR
The Termination Bar is an extruded aluminium bar; that’s designed for securing and sealing compression type flashing terminations mainly used for adjoining flat roof connections…
PVC TERMINATIONS

KERB / UPSTAND
This is a one part Pvcu trim featuring a compression seal along the underside to create a water tight connection to the roofing membrane. This trim eliminates the need of creating a timber upstand as a water check at the roof perimeter…

RUN OFF TRIM
This is a two part pvcu trim with a batten back plate and the front plate with compression seal along the top edge designed for creating a gutter drip section , the trim also provides reliable periimeter securement of the roofing membrane..
Got a Question?
If you have a question about one of our products or need any technical advice,
do not hesitate to drop us a message

FLEXI PROOF FLAT ROOF SYSTEMS
Rugge Farm, Horsham Road, Beare Green, Dorking, RH5 4PT


PHONE NO
Find us in Social Media